Place metal-ceramic crowns on frontal and chewing teeth in Moscow

Metal-ceramic crowns are a reliable, long-term way to restore teeth. Although cermet material is very durable, it is not eternal. The patient sometimes encounters cracks, abrasions, chips or scratches on the surface of the crown. Damage to ceramic cladding is caused by:

• High chewing load (too hard food);
• violation of the manufacturing technology of a crown or prosthesis;
• incompatibility of frame base and cladding materials;
• violation of installation technology (long prosthesis, incorrectly selected abutment teeth);
• bite problems;
• bruxism (teeth grinding).

Damage to the ceramic lining disrupts the aesthetics of the prosthetic structure and its functionality. But this is no reason to despair. The damaged surface can be restored, returning the crown to its original appearance. The main method of restoring a chipped crown without removing it is the restoration of metal ceramics with a light-curing composite.

Types of crowns

Metal-ceramic crowns differ in the metal alloy from which the frame is made, the manufacturing method, and service life. In most cases, an alloy of base metals (chromium-nickel, chromium-cobalt) is used to make the frame. They are durable, reliable, and not subject to deformation. This is a budget option that, with proper care, will last 8-10 years.

Often the frame is made of an alloy of gold with palladium, platinum, and silver. These are hypoallergenic materials that have an antibacterial effect, containing up to 80-90% gold. Ceramic-lined structures look natural, so they are perfect for installation in the smile area. Service life – up to 12-15 years.

When it comes to prosthetics on implants, the base of the crown is made of titanium. The material is compatible with body tissues, does not cause allergies, and eliminates the development of galvanic effect (galvanosis). Such structures will last 15 years or more.

According to manufacturing technology, metal-ceramic crowns can be cast or milled. Ceramic mass is applied layer by layer to the finished frame, made by any method, firing each subsequent layer. Modern dentistry has solved the problem of the “blue” strip around the gums, which made the installation of metal-ceramic structures on the front teeth undesirable. Today, crowns with shoulder mass are used - the manufacturing technology provides for a special ledge, which is also lined with ceramics to avoid oxidation of the metal upon contact with the gum. This makes the prosthesis aesthetic, allowing you to restore incisors and canines.

Criteria for crown correction after installation

The main criterion that an orthopedic dentist follows when installing dentures is the correctness, uniformity and density of the bite. If the pressure is distributed unevenly, then even the most durable material will not last the period stated by the manufacturer. The service life of the most durable and hard crowns—ceramic and metal-ceramic—depends especially strongly on the quality of correction.

In addition to the correct bite, other parameters are also taken into account, for example:

• crown color (if the wrong shade of the base or dentin layer is chosen for the prosthesis, it is completely redone or corrected with an additional layer of ceramic with dye);
• contact points and the contour of the walls of artificial teeth (contact density is checked with floss - dental floss);
• retention of crowns on supports (the degree of compression of the base in an unfixed state);
• marginal fit of prostheses.

The last indicator is very important, because if the crown hangs over the gum or there are too large gaps, the mucous membrane can be injured, and food particles and bacteria will get into the gap, which can provoke inflammation.

The task when correcting a crown after installation, ultimately, is to first obtain a prosthesis of the desired shade that is in maximum contact with the base, with optimal clearances relative to adjacent teeth and gums, the sides of which will not protrude excessively towards the tongue and cheek. Before fixation, a crown of the required internal diameter should move almost freely along the ground surface (implant), because a frame that is too tight makes it difficult to put on (this often leaves a gap near the gums).

✔ In Dr. Kizim’s clinic, they will not only quickly make you a prosthesis, but also implant a base for it if your own teeth for some reason cannot serve as a support for the crown. The patient is required to make only a few (on average no more than 3-4) visits to the dental center to correct and adjust all artificial teeth to the bite.

Restoration methods

Shallow cracks and abrasions are eliminated by polishing the ceramic surface. Small chips are restored using light-curing composites. This is the most common way to restore an orthopedic system without replacing it. Restoration of metal ceramics includes the following stages:

• The extension area is isolated from moisture;
• grind the chipped area to improve the adhesion of materials;
• after drying, a composite material is applied to the defect layer by layer, each layer is illuminated with a UV lamp;
• Upon completion of the extension, the area is ground and polished to give a natural shine, the appearance of a crown.

Repairing a metal-ceramic chip takes about 30 minutes. Restoration extends the life of the prosthesis, restores the original appearance, and returns the aesthetics and functionality of the dentition. However, repair of chips on metal ceramics is carried out without a guarantee, since there are many negative factors that affect the service life of the restoration.

If a metal-ceramic crown breaks off, there is no need to throw away the fragment. It is likely that the doctor will be able to use it to restore the integrity of the lining. In case of extensive damage, when a significant part of the metal is exposed, or chips of the lining of the contact surfaces, another option is required - replacing the damaged structure with a new one.

Why did the metal-ceramic crown break?

In fact, the carelessness and negligence of the patient is far from the primary reason for the chipping of metal-ceramics. The crown can also chip:

• If the metal alloy and the ceramic mass do not match in thermal expansion;
• If the patient suffers from bruxism (involuntary creaking and grinding of teeth);
• If some foreign object gets between the crown and the stump of the tooth;
• If the tooth was initially modeled incorrectly;
• If the ceramic veneer was fired at the wrong temperature;
• If there were holes or chips in the frame.

How is a crown replaced?

Installation of a dental crown is a non-removable prosthetic method. This means that the patient cannot remove the structure on his own. This is done exclusively in a clinical setting. After the specialist has decided to replace the structure with a new one, in order to facilitate the removal of the damaged crown, it is carefully sawed or the cementing composition is destroyed with ultrasound. In this case, the crown can be removed without damaging it.

After removing the structure, the dentist assesses the condition of the supporting tooth and, if necessary, treats it. Upon completion of treatment and filling, repeated prosthetics are performed. That is, dental impressions are taken again, a prosthesis is made in the laboratory, and after fitting, the finished structure is fixed with cement.

The choice of material for a new dental crown depends on the clinical picture and the wishes of the patient. Often, when it is necessary to replace an old structure with a new one, the patient wants to improve the aesthetics by changing metal ceramics to solid ceramics or zirconium dioxide.

Tooth perforation: what to do and should you panic?

Perforation (of the bottom, walls of the tooth or root canal) is a complication that can occur during endodontic treatment when working with burs, hand or machine tools for mechanical treatment of the canal, as well as when installing pins and inlays, and representing a pathological (unnatural) message (hole) with supporting surrounding tissues (bone, gums, periodontal ligament).

Types of perforations

By localization level:

• Crown part of the tooth
• Walls of the tooth crown
• In the area of ​​furcation (furcation is the junction of the roots of the tooth in multi-rooted teeth

Root part of the tooth (canal)

• Wellhead
• Middle part
• Apical part

By time of occurrence:

• Fresh:
  which arise during the treatment process and are immediately covered with special materials
• Old:
  after the occurrence of which no measures were taken to eliminate them, which worsens the prognosis and can lead to additional complications (infection, fracture, crack)

By type of perforation:

• Spot
• Strip perforations (ribbon, longitudinal)

Possible causes of perforation

Let's now see why this complication may occur.

Perforations are most often associated with doctor errors (careless work with burs, ignorance of anatomy and lack of experience, incorrect use of instruments for mechanical processing of canals, etc.). Also important are dental dystopia (improper position in the dentition), complex anatomy of the root canal system, calcification of the dental cavity and obliteration of canals.

Very rarely, the cause may be injury or advanced caries.

Let's look at each type of perforation in more detail.

Perforation of the tooth wall

most often occur when working with burs when creating access to the root canals and deviation from the axis of the tooth.

Perforations in the furcation area

arise as a result of excessive preparation in the process of creating access to the root canals; when installing pins, when they deviate from the course of the channel; when searching for the mouth (entrance to the canal) in case of obliteration (obliteration or calcification - a process in which replacement dentin is deposited, which tightly closes the lumen of the canal).

Perforation of the root canal wall

can occur with a complex anatomical structure of the canals (bends, branching canals), with excessive pressure on the instruments, incorrect direction of insertion of the instrument, with errors in the initial stages of work (creating steps, blocking the canal lumen with sawdust with insufficient irrigation), when preparing the canal for the pin, when trying to remove broken fragments of instruments, as well as during repeated endodontic treatment.

Strip perforations

usually occur when preparing a channel for a pin or when trying to remove broken fragments of instruments. In this case, the canal wall seems to be “worn” and an elongated defect is formed.

How to diagnose perforation?

If perforation occurs during treatment, the patient may feel pain, and the doctor will visually see bleeding from the perforation area.

We can see old perforations on x-rays and when analyzing a computed tomogram. For example, an unfilled or underfilled canal, periapical lesions, excessive release of filling material in the root wall area, deviation of the filling material from the course of the canal when the boundaries of the installed pin cross the boundaries of the canal. All this can help to suspect the presence of perforation.

We can also visualize perforation using an operating microscope during repeated endodontic treatment or diagnostic preparation.

Symptoms of perforation

Fresh perforations are usually not accompanied by symptoms, but pain may occur when they occur.

Old perforations are also usually asymptomatic.

There may be periodic discomfort when biting or minor pain.

Treatment of perforation

Treatment tactics depend on many factors:

• In which area did the perforation occur: the most favorable prognosis are defects of the apical part, because, as a rule, they are not infected. The most unfavorable ones are the furcation and estuarine ones, because the zone of maximum infection is located in this part.
• Fresh or old perforation
• Is there apical periodontitis or not?
• At what stage did the perforation occur: at the initial or final stage? Defects that occur at the beginning of work have a greater risk of infection and therefore require additional medical treatment
• Perforation size

If this perforation is fresh, then after stopping the bleeding it must be immediately closed with MTA-based material. This is a special cement (mineral trioxide aggregate), which has biocompatibility, a chemical bond with dentin, a high degree of sealing and stimulates the formation of cement-like tissue, which is especially important for us when closing such defects.

If this is a small root canal perforation, it can be closed by filling the canal with a bioceramic sealer.

Old perforations, as a rule, always become infected, therefore, before closing them, it is necessary to clean the edges of the perforation: mechanical removal of infected dentin and medicinal treatment (in essence, this is a kind of “wound”, which requires the removal of “contaminated” tissues before applying a medicinal ointment).

Thus, the faster the perforation is closed, the better, because the risk of damage to periodontal tissue (ligament and bone tissue), which leads to lesions that are difficult to treat, is reduced.

But if you leave the problem without treatment, you can get complications, such as:

• Infection and development of apical periodontitis
• Root cracks
• Root fractures

After treatment of a tooth with perforation, it is subject to dynamic observation and radiological control.

Let's summarize: creating a perforation in the vast majority of cases is a doctor's mistake, despite modern technologies and tools. Such mistakes happen quite often, and it is rare that a doctor has never perforated a single tooth in his entire practice. No one is immune from this error, but if you follow a number of certain rules, you can reduce the risk of perforation to a minimum.

Materials

In dentistry, the following are used to restore a tooth crown:

• Metal plastic, fragile structures. As a rule, they are used as temporary dentures or for implantation, if artificial teeth cannot be overloaded.
• Metal ceramics (metal base with ceramic coating). The likelihood of chipping on such crowns is lower than in the previous case, but with improper care, such structures can be destroyed.
• Ceramics. Under heavy load, structures can crumble and chips occur.
• Zirconium or aluminum dioxide. When using prosthetics with these crowns, the risk of various defects appearing during wear is minimized.

Metal ceramics

Metal ceramics represent a compromise between strength, aesthetics and cost. The structures are cast from metal alloys (mainly cobalt-nickel or cobalt-chromium) and can be either individual for each unit or pavement. In some cases, the frame may be made of titanium or precious materials.

A porcelain coating is applied over the metal body to match the patient's enamel color. The mass is applied manually, layer by layer, and during the manufacturing process, each layer is fired in an oven at high temperature. This technology is necessary to create additional strength of the product.

The disadvantage of metal-ceramics (as well as metal-plastic) is the need to grind down teeth and remove nerves to install a crown.

In addition, if the decorative layer is damaged, the metal base will be visible underneath it, which is significantly different from the appearance of other teeth.

This is interesting: Gold dental crowns - advantages, production and price

Metal-plastic

Metal-plastic is made according to the same principle as metal-ceramics, with the difference that instead of porcelain, plastic acts as a facing material. It is cheaper than ceramics, but plastic has a number of disadvantages.

Plastic is capable of absorbing food particles during use, which can cause its surface to become stained and acquire an unpleasant odor.

In addition, the light transmittance of plastic differs from the enamel of real teeth much more than the same characteristic of porcelain, which reduces aesthetic indicators.

In addition, the problem of chipping decorative plastic coating is quite common.

Ceramics

Ceramic crowns are made from porcelain. They are created using high-temperature injection molding technology, which makes it possible to produce products of ideal shape and high strength.

Due to this technology, ceramic crowns do not require metal frames, although they are somewhat inferior in wear resistance to metal-ceramic structures.

Unlike metal-ceramics, porcelain crowns have a much more aesthetic appearance and stability.

The disadvantage of such products is the impossibility of manufacturing bridge structures (only individual dentures for the crown of teeth are made from ceramics). In addition, such products have a high cost.

Zirconium dioxide

Zirconium dioxide crowns are also ceramic-coated products. Zirconium dioxide is one of the most modern materials for the manufacture of dental crown prostheses.

The frame of zirconium crowns is very durable and has a natural color – white or close to the color of the patient’s enamel. A layer of sintered porcelain is applied on top of it.

This structure allows you to combine strength and high aesthetics. Zirconium crowns do not show through when exposed to direct color, which further increases their aesthetics.

How to avoid further chipping?

It should be remembered: although cermet is a durable material, its ceramic base can be damaged. Therefore, dentists do not recommend eating solid food that needs to be chewed; they advise you to give up the habit of gnawing on a pen or pencil, and not to hold small objects in your mouth, holding them between your teeth.

In addition, special attention should be paid to oral hygiene . Although plaque does not harm the crown itself, it can affect dental caries in the neighborhood.

It is necessary to visit the dentist approximately once every six months so that the doctor promptly notices microcracks or chips of the crown, checks the reliability of its fastening and removes food particles that may get between the gum and the crown.

You can install or restore a crown, as well as sign up for a preventive examination at the As-Stom clinic 597-05-05 or using the online application form .