Manufacturers of dental implants, rating - which dental implants are the best

Our private clinic “Aesculapius” specializes in providing dental services of any level of complexity. We provide our clients with high-quality American implants from trusted manufacturers that have proven themselves in the medical market. Experienced doctors will carefully, quickly and painlessly place the structure and monitor the process of its engraftment to the bone tissue.

4 dentists of different specializations work in the clinic every day, so, if necessary, the client will be able to get an appointment with a highly specialized specialist and consult with him on a specific issue. In addition, the clinic has state-of-the-art equipment, which is purchased from trusted, world-famous suppliers.

With us you can safely, profitably and inexpensively install an implant made in the USA, which will definitely take root and is guaranteed to last for many years. The clinic is located in the center of Moscow, very close to the metro, so it will not be difficult to get there by any public transport. For car owners there is parking directly opposite the main entrance.

Bicon implant installation process (USA):

Stage 1. Preparation

At the initial consultation, the doctor examines and assesses the state of your oral health. The thickness and mobility of the mucous membrane, the condition of the jaws and bite are determined. Tests, radiography, and computed tomography are prescribed. Using tomography, a working model of the structure is developed, which is needed for the correct location of the system. Based on the results of the examination, a clinical picture and subsequent treatment plan are drawn up.

Professional cleaning is carried out - plaque and tartar are removed. If there is a disease, sanitation is carried out - caries and other inflammatory processes are eliminated.

Stage. 2 Implant installation

The installation process according to the protocol is similar to other implantation methods. The artificial root is implanted under local anesthesia. The clinic uses effective pain relief methods; the patient will experience virtually no discomfort. The surgeon performs an osteotomy, prepares a section of bone to prepare the bed, and creates a socket into which the implant is implanted. The wound is closed and stitches are applied. The fixation procedure takes on average 50–60 minutes. If necessary, a temporary crown is installed - this will allow the patient to achieve an aesthetic smile during the period of osseointegration.

Stage. 3 Prosthetics

Restoration on Baikon implants is carried out using a one-step, two-stage technique. After osseointegration of the artificial root (3-6 months), the abutment and crown are installed. The healing period depends on the surgical procedure and the anatomical features of the jaws.

Implantation can be performed immediately after tooth extraction, or in the case of severe bone tissue atrophy - after a few months.

The unique design of Bicon systems ensures successful regeneration of cortical bone at the neck of the product. This prevents the tissue from reabsorbing.

Dental implants from America used in Russia

Nobel Biocare (Nobel) - one of the best today

The world's largest manufacturer of dental systems, the founder of modern implantation . The main production sites are concentrated in Switzerland, the USA, Japan and Canada. The products produced are the most high-tech in the world. The company provides specialists with the opportunity to use the Nobel Procera system in conjunction with proprietary Nobel Guide software.

Advantages and disadvantages of Nobel Biocare

Among the positive points:

• almost 100% survival rate;
• convenience, ease of installation;
• minimal tissue damage due to the special shape of the rods;
• unique marking makes counterfeiting impossible;
• 10-year warranty period for Nobel abutments, lifetime for implants;
• the patented TiUnite surface ensures rapid osseointegration;
• high aesthetic indicators, especially when implanted in the area of ​​the anterior teeth.

There are few disadvantages:

• belong to the category of the most expensive;
• some models have too aggressive threads, requiring the doctor to have experience working with them.

Types of manufactured implants

• NobelActive - for implantation with limited interdental space, in the area of ​​the lower frontal units. Indicated for installation in the socket of an extracted tooth.
• NobelParallel Conical Connection - have a simple design and can be easily implanted into any type of bone. They are used for two-stage, one-stage implantation.
• NobelReplace - reproduces the natural shape of the root. They consist of three subsystems of different shapes, equipped with different types of connection to the abutment:
• NobelReplace;
• NobelReplace Select Tapered;
• NobelReplace Conical Connection.

• minimum bone requirements;
• high aesthetic result;
• saving the patient’s personal finances on installation;
• fast operation.

Bicon Dental Implants (Baikon)

The company announced itself in 1985 with the release of an 8 mm long implant with a wide thread. Since then, Dental Implants' activities have been focused only on the production of short models. The company's products are in demand in 65 countries.

Advantages and disadvantages

Positive points include:

• the implant length of 8 mm makes installation possible even with insufficient height of the alveolar process;
• the area increased by 30% is the key to reliable stability of the crowns;
• original wide plateau for increased stability of the entire structure;
• an innovative hermetic connection protects against penetration of pathogenic microorganisms into the implant cavity and allows the abutment to be installed in any position;
• thanks to the beveled shoulder of the neck, the design is invisible in the gum;
• due to the abutment painted in the natural color of the tooth, installation without crowns is possible;
• implantation can be carried out even with low bone quality without sinus lift;
• the rehabilitation period is accompanied by a minimum of complications;
• Delayed or immediate implantation is possible.

The disadvantages include:

• Insufficient clinical experience of the study in Russia, due to which the quality of the installation and the effectiveness of treatment may suffer.
• The implantation is performed not by the traditional method of screwing the rod, but by driving it into the bone. This makes the patient feel uncomfortable.

Catalog of proposed systems

The following types of models are available on the market:

• Short Implants (with an internal diameter of 3.0 mm) - a line of the shortest implants, designed based on data on the correct distribution of loads and the implantation process. Equipped with a tight cone-shaped connection. Used for partial and multiple edentia with severe bone deficiency. This ensures the preservation of the inferior alveolar nerve and sinus. The line includes models with a diameter of 4.5 and 5 mm, a length of 6-11 mm.
• MAX 2.5 TM (diameter 2.5 mm) - for the frontal region, but can be implanted in other areas of the jaw arch. They have a reinforced cone-shaped wide neck. Models available in diameter:
• 4 mm (length 5.0; 8.0; 11.0 mm;
• 4.5 (length 8.0 and 11.0) with titanium or osseointegration coating.

• 3 mm, length 8.0 mm with a special coating to reduce the time of osseointegration;
• 3.5 mm, length 8.0 and 11.0 mm with two surface types;
• 4 mm, with a length similar to the previous version and two types of coating.

BioHorizons implants

BioHorizons Implant Systems produces dental systems for 50 countries. The designs allow treatment even in the most complex clinical cases.

Advantages and disadvantages

Positive properties are:

• patented laser surface treatment technology;
• large square thread facilitating easier insertion and rapid osseointegration into the lamellar bone;
• the surface is treated with calcium phosphate to shorten the healing period;
• possibility of installation immediately after tooth extraction;
• hexagonal connection of the abutment;
• high rates of primary stabilization;
• reduced engraftment time;
• the ability to use any implantation method.

The disadvantage is that the majority of abutments are produced in a golden or pronounced silver color, which is difficult to disguise with crowns. In good light, dentures appear yellowish or gray .

Product catalog

The company produces several lines:

• root-shaped - classic models, equipped with an internal hexagon. Used for two-stage implantation.
• BioHorizons Internal - rods have a square thread and a rounded head, which ensures the correct position of the rod.
• BioHorizons Single-stage - for one-step installation. They are combined with several types of abutments, which expands the possibilities of prosthetics.
• BioHorizons Laser-Lok 3.0 - very thin rods for implantation against the background of limited interdental space.

Together with the main lines, the company produces individual one-piece implants for a one-stage protocol, and models for fixing removable dentures.

Dentsply implants

This American holding includes three large European companies that produce implant systems XiVE, Ankylos and Astra Tech. Delivery is carried out to all points of the planet.

Positive and negative sides

Dental designs from the Dentsply concern are valued for:

• unique thread design, allowing implantation even with very loose bone tissue;
• high rates of osseointegration;
• special fastening of the crown on Ankylos implants (below the gingival margin), providing maximum aesthetic results;
• lifetime warranty;
• the cylindrical shape of Astra Tech structures, smoothly turning into a tip, which helps to evenly distribute the load;
• the special surface of Xive implants, which effectively interacts with bone tissue and accelerates osseointegration;
• minimal trauma during installation;
• protecting bone from destruction.

Experts attribute high cost to the disadvantages of Dentsply systems.

Available models

XiVE implants are presented in the following series:

• S plus Friadent - for single restorations and when installing bridges on implants using a two-stage protocol.
• TG Friadent - indicated for one-stage, transgingival implantation.
• 3.0 Friadent - the thinnest rods for difficult clinical situations. Used for implantation in the area of ​​the front teeth.

The Ankylos catalog offers the following lines:

• C/X - with one-stage, two-stage implantation.
• SynCone is a ready-made system for implantation, usually in older people.
• Implants on the CAD/CAM platform are used for prosthetics with bridge and beam structures.

The Astra Tech lineup is impressive. The most popular series is marked with the TX index. This includes the thinnest TX 3S implants with a diameter of 3.0 mm. The largest model, TX Profile 5, is used for installation in the chewing section.

Dental systems from BIOMET 3I

The company's products, founded in 2004, are supplied to dozens of countries. Production is based on strict quality control.

Advantages and disadvantages

Main advantages:

• The fastening part of the structure is equipped with a polyhedron that changes the angle of rotation by 30 degrees. Due to this, the operation time is reduced and good aesthetic results are achieved.
• The implants contain a biologically active component to improve the quality of engraftment.
• High stability is achieved due to the complete absence of residual stress.
• Platform switching capability ensures ease of operation.
• The unique QuickSeat fastening allows the implantation of the structure to be carried out as accurately as possible.

The only negative is the high cost.

Catalog of proposed systems

• 3i T3 is a model for implantation in the smile zone. Characterized by high survival rate and primary stability.
• OSSEOTITE - the series includes transgingival, root-shaped and parallel implants with an expanding platform. The micro-textured surface is responsible for the rate of osseointegration. Aesthetics are on point.
• NANOTITE - allow you to preserve bone tissue. The surface is treated with calcium phosphate crystals.

Zimmer is another US manufacturer

For a long time, the company produced trabecular implants for joints based on tantalum metal. After many successful operations, the technology was applied to the development of tooth replacement structures. Tantalum is more flexible and durable compared to titanium.

Advantages and disadvantages

Positive properties:

• installation is possible in cases of severe jaw bone deficiency or bruxism;
• porous coating reduces the time of osseointegration and rehabilitation;
• the original connection system eliminates micro-mobility;
• the presence of branded surgical instruments simplifies the work of a specialist;
• Marking of the rods eliminates counterfeits.

The main disadvantage is the high cost.

• Complete restoration of the dentition in just 4 days!

  
  more details

  Roott Pterygoid Implants Sinus lift is no longer needed!

  more details

  Once and for life! Express implantation in 4 days with a permanent ReSmile prosthesis

  more details

  All-on-4, All-on-6, ReSmile, Zygomatic implantation We use all modern methods of dentition restoration

  more details

Product List

• Standard root-shaped structures for the treatment of adentia of any severity, usually in the upper jaw. Designed for implantation according to the classical protocol.
• Thin - used for narrow alveolar ridge, thinning or bone deficiency.
• Mini implants - indicated for express implantation.

The company Implant Direct appeared on the Russian market not so long ago

A young American company founded by Dr. J. Nizhnik, developer of the hexagonal connection system.

Positive and negative characteristics

Main features:

• Innovative dual guide mini-thread provides quick installation and increased stability in the bone.
• Models with two surfaces are available:
• SBM-textured coating;
• HA-coating in RePlus, ReActive systems.

The downside is the company's short lifespan and the irregular supply of systems.

Implant series

The company produces the following implantation systems:

• RePlant (compatible with Nobel Replace) - high structural stability due to the double trefoil joint. Patented SBM (Soluble Blast Media) coating accelerates osseointegration.
• SwishPlant (compatible with Straumann) - used for one-stage implantation, have an SBM surface. Length range in mm:
• 6,0;
• 8,0;
• 10,0;
• 12,0;
• 14,0;
• 16.0 mm.

• 3.0 - blue;
• 3.5 - green;
• 4.5 - purple;
• 5.7 - yellow.

Opinion of an implantologist : “I have been installing American implants from several companies for a long time. I only had to face rejection twice. All American systems are of high quality, take root quickly and without complications. I am glad to have the opportunity to fight pathologies of any complexity. Therefore, I believe that the high price of implants from BioHorizons, Zimmer, Nobel and others is completely justified.”

Advantages of Bicon implants (USA):

• lack of threaded fasteners/elements;
• small product size;
• reliable fixation;
• lifetime quality guarantee;
• high survival rate (99%);
• ease of installation, installation without a crown is possible;
• the ability to perform express operations with instant loading;
• hermetically sealed connections to prevent the formation of cavities.

The risk of rejection of an American implant tends to zero, since it is made of biocompatible materials. Beacon implants are a safe and painless restoration of teeth that work and look like natural ones.

The design has high aesthetic indicators. The patient will not encounter such a problem as a dark stripe on the neck of the tooth, which appears as a result of gum recession after prosthetic crowns.

Implants are a tightly connected structure. This structure ensures comfortable wearing and does not allow pathogenic organisms to develop at the site where the system is introduced.

The versatility and high level of stability allow the implants to be used even in difficult clinical situations. The shape of the artificial root is securely fixed in the socket, which in some cases does not require bone grafting.

Due to their biocompatibility, aesthetics and high durability, Bicon systems have gained popularity around the world.

American dental implants from the Biohorizon concern (Biohorizon)

The Biohorizon brand was born in the early 1990s. These implantation systems are considered one of the most popular in the world, due to their unique performance characteristics and decent survival rate. American Biohorizon implants are made of titanium alloy.

TOP 5 advantages of American Biohorizon implants:

1. Original type of carving. Thanks to this indicator, the Biohorizon artificial root is securely screwed into the bone and is guaranteed to stay there.
2. Unique Laser-lock coating. This means that there is a special coating of calcium phosphate on top of the titanium alloy. In this case, the neck of the Biohorizon implant is carefully pre-treated with a laser beam. All these factors guarantee reliable implant survival in the bone.
3. Variety of lines of dental systems. The Biohorizon brand produces several lines of implants for restoring masticatory groups, the smile zone, as well as solving problems in particularly difficult cases of implantation. The Biohorizon brand catalog contains implantation systems for classical and one-stage implantation.
4. Implantation for bone deficiency. Biohorizon produces a series of implants that do not require prior osteoplasty or sinus lift. The systems are screwed into the deep layers of the bone, where they are securely held throughout the entire period of operation.
5. Optimal survival rates. The Biohorizon company demonstrates almost one hundred percent survival statistics for American implants of this brand.

The estimated price of American implants from the Biohorizon brand ranges from 31 to 35 thousand rubles.

Care

Implants require meticulous care

. You should regularly clean the denture with a soft brush, use rinses, dental floss, floss, undergo routine examinations, and follow all the dentist’s recommendations. Provided proper operation, the service life of the system is 15-20 years.

Implantologists at Dr. Razumenko’s clinic perform operations at the highest level, which reduces the risk of complications to a minimum. After surgery, the following are possible:

• pain, swelling in the implant area;
• minor bleeding;
• increase in body temperature.

If the patient follows all medical recommendations, the pain and discomfort goes away quickly enough. In the first days after implantation.

• If swelling occurs, ice should be applied to the implantation site.
• In the first week, do not resort to increased physical activity.
• Avoid intensive rinsing of the mouth, do not spit, and do not touch the implantation site with your tongue.
• In the first days, doctors recommend avoiding alcohol consumption and quitting smoking.

American implants from the Nobel Biocare brand

This brand is currently owned by the American concern Danaher, although the implants themselves are produced in Europe, Japan and certain American cities. This brand leads the world ranking of world leaders in the production of premium quality dental implants.

Features of American Nobel Biocare implants:

• Implants are made from pure titanium, which is completely chemically inert;
• Implant systems are characterized by improved survival in the bone, even in the most complex clinical cases;
• Due to the conical shape, the implant easily penetrates into hard bone, and an abutment (the connecting link between the prosthesis and the implant) can be comfortably placed on the triangular top of the implant;
• The surface of the implants is biologically active, due to which successful and relatively rapid osseointegration occurs;
• Strict control of originality. If a patient receives a Nobel Biocare implant, it is easy to verify its authenticity. Each root has a serial identification number, the product is entered into the manufacturer's database;
• Lifetime warranty on implants from the manufacturer.

The average price of American implants from the Nobel Biocare brand is 60 thousand rubles per unit.

Prices for Bicon implants

Premium systems produced by the American company Bicon Dental Implants are distinguished by a reasonable price against the backdrop of excellent quality, durability and minimal risk of rejection. The final cost depends on the implant model, clinic equipment, and doctor’s qualifications. The average price tag in Moscow varies between 22-37 thousand rubles.

To find out the price of American titanium implants Bicon, sign up for a consultation at Dr. Razumenko’s dentistry by calling.

* The prices indicated on the website are not a public offer. The exact cost of treatment can only be determined at an appointment with a doctor.

Prices for treatment in Moscow full price list

Share on social media networks:

Article Expert:

Lavrentyev Sergey Sergeevich

Doctor - dentist, surgeon, implantologist. He regularly improves his professional level and studies modern methods of dental implantation and surgical dentistry at international seminars and conferences of outstanding implant surgeons in the world.

Work experience 25 years

Bone Volume Requirements

After tooth loss, atrophy (loss) of bone tissue begins. This leads to negative consequences, one of which is the impossibility of implantation in the future. The bone is too thin for an implant. In addition, it is not dense enough to provide high primary stability. Of course, leading manufacturers have provided for such clinical cases and produce pins for cortical, zygomatic (where the tissue is denser) implantation or compression pins that compact the bone along the movement of the thread.

Israeli manufacturers have also achieved great success in producing products for installation in bone tissue of different densities. Korea is somewhat behind here. They, for example, have neither pterygoid (pterygoid) nor zygomatic models. If we are talking about severe atrophy, the answer to the question “Israel or Korea?” obvious. But Switzerland or Israel - it depends on other factors. If the bone is dense and there are no complications, then Korean or Israeli implants will perform their functions perfectly.

We recommend that you read

Inno implants (South Korea)

Impro implants (Germany)

Dental implantation

Basal implantation

Design selection criteria

• Root-shaped, conical structures made of titanium take root best. They help distribute the chewing load evenly.
• Possibility of implantation without bone grafting.
• Ease of installation reduces the rehabilitation period.
• Availability of quality certificates.
• A coating with microscopic pores is the key to rapid osseointegration. Often the surface is treated with crystals of hydroxyapatite and phosphates for better penetration of bone cells into the structure of the rod.
• The best type of connection between the implant and the abutment is in the form of a micro-thread without a polished neck.
• The aesthetic component plays an important role in the success of implantation. If chosen incorrectly, the metal structure will show through the gums or prosthesis.
• In clinics working directly with the manufacturer, prices for systems are lower.
• The qualifications of the implantologist must be confirmed by relevant documents. You can trust specialists, members of the European Association of Implantologists and the Russian Association of Dental Implantology.
• The high status of the clinics is confirmed by a license to perform dental implantation and the availability of modern equipment.

Implantation

• Basal implantation
• Bloodless implantation
• Dental implantation
• Screw implants

Marinova Larisa Nikolaevna

Lavrentyev Sergey Sergeevich

+7, +7 (915) 1-999-111

Indications and contraindications for installation

The price of Korean, Israeli, and even more so Russian and Chinese implants is much lower than that of leading companies from Sweden, Switzerland and Germany. But they also have enough restrictions. In case of hepatitis, HIV, and cancer, the question of which implants to install: Korean or Swiss is not worth it. Because Korean companies include these diseases in the list of contraindications. Manufacturers from Sweden, Switzerland, and Germany offer a line of products that can be used for complex systemic diseases. No matter how hard companies from Israel or Korea try to catch up with them, they have not yet been able to significantly reduce the list of contraindications. However, it decreases every year; competition forces investment in new developments of pins that will suit more patients.

Top manufacturers of premium implantation systems

• Astra Tech is a Swedish-made implant. It is the best representative of premium implants. They are made from the highest quality materials. Also, during the manufacturing process of the implant, numerous clinical and scientific studies were taken into account. The use of these implants gives excellent results even in quite severe cases. The Astra Tech implant is represented by the Osseospeed TX series. This is a universal system. A special feature of this implant is its conical shape, which ensures maximum stability after implantation. Osseospeed TX Profile - installed if, for example, there is more bone tissue on one side than on the other. Thanks to the beveled shape of the neck, such an implant is held firmly.
• Straumann is a Swiss-made implant. It is popular due to its almost one hundred percent survival rate. A unique alloy of titanium and zirconium accelerates the healing process. A small cone-shaped rod reduces trauma during installation.
• Nobel are premium implants produced in Sweden. They are represented by several systems, each of which is used in its own specific case. Nobel Replace are universal implants that can be easily selected for any clinical case. A simple surgical protocol allows for a faster installation process. Nobel Active - used to replace single teeth. Nobel Speedy - used for All-on-4 implantation. This method is used when it is necessary to restore the entire dentition. Nobel Zygoma - used for bone depletion. The main feature of such an implant is that it is implanted into the cheekbone. Branemark System is a system for classical implantation that always shows successful results.

Economy class implants

• Noris Medical is an Israeli-made implant. An excellent choice for those who are looking for high quality and an affordable price. This type is universal and suitable for different prosthetic techniques. The special RBM coating ensures high survival rate. This is a recognized analogue of Nobel in terms of the line of implants and quality. Only under this brand are pterygoid implants produced, which are used even with obvious signs of jaw atrophy.
• Osstem is a Korean implant. It is characterized by high quality, survivability, aesthetics and an affordable price.

Dentsply Holding Implants

The Dentsply holding produces dental equipment in the USA and has existed since 1899. Its production facilities are located in 20 countries, and its products are known and sold all over the world. For some time now, the corporation has decided to engage in business in implantology. But they did not begin to develop their own systems for implantation, but instead acquired three reputable, branded European companies that were already successfully doing this.

Now Dentsply includes Astra Tech, XiVE, Ankylos, producing luxury implants.

American implants XiVE

Despite its “youth” on the market, Xive has patented its own three lines of implants with FRIADENT plus coating, which is close to the luxury class.

The former German company XiVE is a young brand in this market, existing since the 2000s. It produces three lines of implants with FRIADENT plus coating, which it patented. The systems are close to the luxury class. Professionals highly appreciate the wide capabilities of XiVE implants when performing prosthetics based on them.

American Ankylos implants

The company was also created in Germany. Ankylos has been producing titanium rods for dental implants for over 25 years. The implants are coated with a special biocompatible composition, Friadent Plus, and have a TissueCare Connection, which allows the volume of soft tissue to be preserved. A special feature of the company’s products is the C/X concept, which expands the possibilities of prosthetics due to the fact that any abutment is suitable for all its implants.

USA Implants Astra Tech

Astra Tech was a Swedish company before joining the Dentsply holding. It was one of the top three world leaders in terms of sales in the implantology market. The deal to purchase it cost the holding $2 billion and took place in 2011. But it was worth it to purchase this large implant manufacturer because they truly are the best.

Astra Tech's production combines all of today's most advanced technologies, starting with OsseoSpeed ​​coating, Conical Seal Design and the Conical Connective Contour fastening concept. The resulting final product impresses with its functional and aesthetic qualities.

Rating of dental implants by manufacturers 2022

In Western countries, implants gained popularity several decades ago, while in Russia the procedure for fixing dental systems has aroused interest relatively recently. So, in order to characterize the situation with maximum clarity regarding implants from various manufacturers, we decided to turn to statistics obtained in Western countries. At the same time, when the rating of dental implants was compiled, the key characteristics and advantages of the manufactured systems were taken into account.

Next you will get acquainted with the rating of dental implants by manufacturer:

10. Xive 9. Alpha Bio 8. Dentium 7. Anthogyr 6. Osstem 5. AnyRidge 4. Astra Tech 3. Zimmer 2. Nobel Biocare 1. Straumann

All of the brands described above are considered frequently in demand and are overpriced. But today you can find manufacturers producing dental implants with impeccable performance and at reasonable prices. One of these companies is Dentium. This manufacturer took an honorable 8th position in the ranking of dental implants 2021). In addition, products from the Korean manufacturer Osstem, which have established themselves as high-strength structures at an affordable cost, have gained significant popularity on the Russian market.

Next, we will introduce you to the key “advantages” of the systems that are included in the rating of dental implants by manufacturer. This will give you a more detailed picture regarding the use of different models of implantation systems.

What are the alternatives?

American dental implants are quite actively used in Russian clinics. If we consider more expensive alternatives, we can choose products made in Germany and Switzerland – Straumann, XiVE, AstraTech implants. However, they are similar in quality to Nobel implants, and in some ways they even lose.

But Israeli implants have proven themselves to be low cost and high quality - they can be considered as a cheaper alternative. Among them, the most famous brands are: Alpha BIO, MIS, Adin. All of them are safe, highly compatible with the human body, durable, easy to install, stable, take root well, and are suitable for bone deficiency. The breadth of the provided model range allows you to choose the root that is most suitable for a particular patient.

Important! When choosing implants, you need to remember that the cost of the design is not decisive, because the result of treatment largely depends only on the experience and professionalism of the doctor: an expensive product installed by a novice specialist can be rejected by the body, while a qualified doctor will fix even a budget model on long years.

Video review of a patient 2 months after basal dental implantation