5 ways to remove an artificial crown from a tooth

June 15, 2019

Many patients are interested in the question of how to remove a crown from a tooth, because essentially the structure is permanent. However, this just means that the owner himself cannot remove it from the mouth, but the dentist, using tools and specialized equipment, will do this without difficulty. Today you will learn about how this process goes, by what methods the final result is achieved, what nuances await patients during the procedure of removing a crown from a tooth from an article prepared by journalists from the editorial office of the UltraSmile.ru portal.

What are the ways to remove a crown?

When is it necessary to remove a crown from a tooth?

Removing the crown from a tooth needs to be done only when there is a serious need for it, because the crown itself can be used for 7-10 years or more (the time period depends on the material from which the prosthesis was made).

Let us list the reasons why it is necessary to resort to such manipulation:

• a disease has developed under the structure: for example, secondary caries, periodontitis or a cyst,
• errors made at one of the stages of prosthetics: perhaps the crown does not correspond to the individual characteristics of the patient, is poorly installed and adjusted, is made of low-quality materials,
• the patient’s desire to replace the structure with a prosthesis made of a better and more beautiful material: for example, replace a metal or metal-plastic product with metal ceramics or zirconium dioxide,
• injuries that led to damage and breakage of an artificial tooth,
• destruction of permanent cement on which the orthopedic structure was fixed,
• The product has expired.

The reason for removal may be the development of caries under the crown.
If the tooth under the crown hurts, there is a bad smell, and the structure has become shaky and movable, then it is time to visit a dentist, who, based on an examination and x-ray, will decide on the need to remove and replace the artificial material.

According to numerous studies, the need to prematurely remove crowns already in the first years of use in 40% of all cases arises due to the fact that poor-quality endodontic treatment and poor-quality sanitation of the oral cavity were performed before preparing for prosthetics.

All of the above reasons are a serious reason to think about removing the prosthetic structure. Naturally, first you need to go to an appointment with a dentist, who will explain how crowns are removed from teeth. And we will look at the methods that exist today.

Price

The complexity of the process and its cost will largely depend on the material of the permanent structure and the type of device with which it will be removed.

Let's look at the average cost of techniques using the table as an example.

Most dental clinics include in the cost of dismantling fixed structures the price for further treatment and re-prosthetics.

Method No. 1: sawing with a boron

So, let's figure out whether it is possible to remove a crown with permanent cement.

The method of removal using boron is the oldest and by far the most unaesthetic. This means that after using this tool, the sawn artificial material will only have to be thrown into the trash bin, because it can no longer be used for its intended purpose, that is, it will no longer be possible to re-prosthetize a tooth with it.

The technique is simple, cheap and quite effective, but it must be used by a doctor who has a high level of professionalism, because the approach requires caution and precision. An inexperienced specialist may damage the tooth itself or the soft tissue around it during the dismantling process.

With this method, it will not be possible to reuse the crown

“We removed the crown from the tooth with a regular bur and simply sawed it in half. There’s nothing terrible, but when the material got very hot, the smell, I’ll tell you, was not very good, plus there were slightly painful and uncomfortable sensations, even despite the fact that I had been given anesthesia before this, and the tooth itself had been under the prosthesis for a long time depulped!"

Mari, review from 32top.ru

This method is used if the patient has dentures made of inexpensive materials, which he would not mind disposing of later. The method is also suitable if the artificial structure itself is mobile or wobbly. Then it is simply sawed to the teeth, then, using special tools, the resulting edges are carefully bent in different directions and removed.

Stages of preventative cleaning

In our clinic, professional cleaning is performed in the most painless and gentle way - using ultrasound and subsequent treatment of teeth with an Air Flow device.

Before the procedure, the patient must thoroughly brush his teeth with a regular brush. The dentist then visually assesses the condition of the teeth and gums.

Professional cleaning consists of the following steps:

1. Removal of solid deposits using an ultrasonic device.
2. Removing soft plaque using the Air Flow device.
3. Cleaning interdental spaces using floss.
4. Polishing teeth with special brushes, applying a fluoride-containing composition that reduces tooth sensitivity and strengthens enamel.

Ultrasound removal of tartar

Tartar adheres very tightly to the enamel; hardened plaque fills microscopic irregularities on the surface of the tooth. If you remove deposits mechanically, it is easy to damage the enamel. Chemicals that soften tartar can also worsen the condition of tooth enamel.

Therefore, an ultrasonic device – a scaler – is used to combat tartar. Using a hook-shaped scaler tip soaked in water, pry off the tartar, then turn on the ultrasound. The tip vibrates at a frequency of 30,000 vibrations per second, as a result, the water completely destroys solid deposits.

Using an ultrasonic scaler, even tartar that forms under the gum is removed, which cannot be done with mechanical instruments. The procedure does not damage the gums and tooth enamel.

Removing plaque using the Air Flow device

In order to eliminate soft plaque, Air Flow technology is used. Based on the principle of operation, the Swiss Air Flow device resembles a sandblaster. A thin stream of water with soda particles is applied under pressure to the teeth.

Soft plaque is washed out from all hard-to-reach places. After cleaning with the Air Flow device, the dentist flosses the spaces between the teeth.

Method No. 2: using ultrasound

Are you wondering how to remove a crown from permanent cement in one of the safest and most innovative ways, and without causing any damage to it? Then ask your dentist if it is possible to use ultrasound in your case. Through impulses, the doctor acts on the cement composition, which gradually cracks. The specialist moves along the “tooth-crown” boundary; under the influence of vibrations, the cement is destroyed.

The product can be removed using ultrasound

The procedure really allows you to remove the structure in its original form, but it has a number of disadvantages. First, ultrasound has a rather gentle effect, so it is not always possible to achieve the goal the first time, and sometimes you have to visit the doctor several times. Secondly, only products that are made from not very dense materials are amenable to hardware exposure to sound waves. For example, it will not be possible to remove structures made using glass ionomers using ultrasound. Third, vibrations may be unpleasant for the patient.

How to remove crown dentures in dentistry

As for which doctor removes crowns from teeth, it needs to be clarified that such a procedure falls within the competence of both orthopedists and endodontists. At the same time, today specialists have at their disposal different methods for extracting such structures - let’s look at them in more detail.

Cutting the prosthesis using a bur

The classic option for dismantling a single prosthesis. The artificial material is literally sawn apart and then carefully removed, but the product is no longer suitable for re-prosthetics. This is a simple and accessible method, which, however, requires sufficient experience and skill from the doctor, since all actions must be performed as carefully as possible so as not to injure the living tissues of the tooth and the adjacent mucous membrane.

This is how a prosthesis is cut using a bur

This option is suitable if you need to remove a budget crown model, which you would then not mind sending for scrap. This method is also recommended in cases where the product is already damaged or wobbly. The doctor cuts the structure until it meets the dental tissues, after which, using hand tools, he bends its edges in opposite directions and takes out the denture in parts.

Removal using ultrasound

One of the fastest, safest and most modern methods of removing an artificial crown involves the use of ultrasound. By directly affecting the cement composition, ultrasonic waves lead to the destruction of the binder material. This approach allows you to remove the product without the slightest damage, but the technique also has its drawbacks. Thus, ultrasonic vibrations reproduce a gentle, but too soft effect, which may not always lead to the desired result the first time. In some situations, the patient has to visit a specialist several times.

Ultrasound can also be used to remove the product.

Another point is that this hardware method allows you to remove products made from materials that are not too dense. For example, glass ionomer structures cannot be removed using ultrasound1. In addition, many patients note that ultrasonic vibrations in the oral cavity do not cause the most pleasant sensations, which may be associated with some discomfort during the procedure.

Manual crown remover

Here we are talking about a special tool with metal hooks attached to the end. It is with these hooks that the doctor carefully picks up the edges of the prosthetic structure and pulls it. The shock wave, combined with the force applied by the doctor, leads to the destruction of the cement base, thanks to which the specialist is able to carefully remove the product from the oral cavity.

The photo shows a manual crown remover

Application of the KOPPA (Koch) apparatus

The device in the form of a tool is somewhat similar to a crown remover. There is also a small hook at the end, but this device is activated using a button. It provides a mechanical effect leading to the destruction of cement along the edge of the prosthetic device. As soon as the structure becomes mobile, the doctor takes special forceps and uses them to remove the prosthesis from the oral cavity.

The photo shows the COPP (Koch) apparatus

The use of the KOPP apparatus makes the procedure simpler and less traumatic. However, this method also has its drawbacks. For example, during dismantling, the patient may experience some discomfort due to the twitching of the instrument, which is clearly felt in the mouth. In addition, the device makes a not very pleasant sound. Another disadvantage is that the device can damage the integrity of the ceramic coating, leaving cracks and chips on it, in which case the product will have to be repaired.

"Coronaflex" - a modern approach

This device resembles a pistol in appearance. The air in it is in a compressed state and, after activation, comes out under high pressure, as a result of which the structure of the cement base on which the crown rests is destroyed. At the same time, the prosthesis itself remains intact and intact, as does the surrounding mucosa.

“Immediately after installing the crown, the doctor warned me: if you don’t want problems in the near future, brush it constantly like your teeth and it’s better to buy an irrigator. By the way, it’s a cool thing, very convenient, I recommend it to everyone. But my brother just recently had it removed with coronaflex. According to him, the procedure was not the most pleasant, although it was performed with anesthesia. There was no pain, but it didn’t feel very comfortable.”

Leha1991, from correspondence on the forum www.32top

A more modern device is Coronaflex
. Not every dental clinic has such a device. The procedure using it will cost an order of magnitude more than dismantling using the methods described above. This approach is recommended for the extraction of expensive products, for example, zirconium. Subsequently, such a single prosthesis can be used again to hide the dentition defect. Patients note that the procedure takes place in more comfortable conditions, and doctors praise the device for its ease of use and speed of extraction.

Method No. 4: Kop (Koch) apparatus

This is a tool that again has a hook at the end. However, the device is not launched mechanically, but using a button, which breaks the cement along the edge of the crown using small shocks or a shock wave, after which the structure begins to move from its place. Next, the doctor can only use special forceps that hook and help to finally remove the prosthesis.

See what the Koch apparatus for removing crowns looks like in the photo.

This is what the Koch apparatus for removing crowns looks like

This device is more convenient and efficient than a manual device; it allows you to remove the product with virtually no damage and “works” quickly. However, it also has disadvantages. In particular, many patients note that during the procedures they feel “twitching” and discomfort. Also, some people are very concerned about the noise that the device makes. There is one more drawback - the device can damage the ceramic coating of the crown, leaving chips and cracks, and then the structure will have to be restored.

Method No. 5: using the Coronaflex device

The device looks like a pistol, and its operating principle is based on compressed air, which escapes from the device under pressure and breaks the cement. At the same time, this device does not have any negative effect on the artificial material of the structure or on the soft tissues of the patient.

The Coronaflex device is not available in every dentist today, so the procedure with it will be more expensive compared to other methods. However, it makes sense to use the device if you have a zirconium dioxide crown, which can be reinstalled after, for example, the tooth under the structure is cured. In addition, the procedure using this device is more comfortable, safer, and requires less time to solve the problem. Also, according to patient reviews, the device makes virtually no noise, which allows you to feel comfortable in the dentist’s chair.

The Coronaflex device removes the crown quite comfortably

Is it possible to remove a crown at home?

If you are interested in the question of how to remove a crown from a tooth at home, then the answer will be clear: you cannot do this at home. This procedure should only be performed by a professional dentist. For those who neglect this rule, everything can end sadly: there is a risk of damaging not only the artificial material, but also injuring the soft tissues and the tooth itself, which is located under the crown.

You can try to remove the structure yourself only if it has come unstuck and started to loosen, or if it has fallen apart or split, and there is a need to remove the remaining fragments of the product, which can injure the mucous membrane or antagonist teeth. But it’s better if you rush to see a dentist even in such situations.

If the structure comes unstuck, you can remove it yourself

If the materials from which the crown was created, as well as the cement, have expired, and you do not rush to the dentist, then an unpleasant situation may await you. For example, artificial material can be swallowed. What to do in such situations, read the material “5 useful tips for those who have swallowed a crown.”

Is it possible to cure a tooth without removing the crown?

The question is very relevant, because usually, after removing a structure, it can rarely be reused for its intended purpose, therefore, you have to pay money for the manufacture and installation of a new prosthesis. Fortunately, today in some cases you can do without removing the structure. For example, if it is necessary to cure recurrent caries or remove a small cyst, the doctor may perform endodontic manipulations through a small hole made in the crown or through an incision in the gum (to remove the cyst). After the procedures, this hole will be masked with a composite material, and the sutured gum will need time to heal.

In some cases, modern technologies make it possible to cure a tooth without removing the crown.

However, you need to understand that in order to safely and effectively carry out such jewelry manipulations, the doctor must be a professional. In addition, the patient himself should seek help when the problem is still minor and the inflammatory process has not gone too far. To do this, it is necessary to undergo preventive examinations, because the more minor the problem, the easier it is to solve it with therapeutic methods, without resorting to drastic measures.

Notice

: Undefined variable: post_id in
/home/c/ch75405/public_html/wp-content/themes/UltraSmile/single-item.php
on line
45 Notice
: Undefined variable: full in
/home/c/ch75405/public_html/wp-content /themes/UltraSmile/single-item.php
on line
46

Rate this article:

( 6 ratings, average: 5.00 out of 5)

crown

1. Lutskaya I.K., Zinovenko O.G. Frequency of development of caries in teeth covered with artificial crowns.

Indications for removing the structure

Installing a crown is a long and laborious process, sometimes painful. The situations and reasons for removing dental structures must be quite compelling. After all, not every patient will agree to be in the dental chair again to correct the problem that has arisen. Conventionally, several reasons can be identified for the elimination of a fixed orthopedic product.

Toothache or bad odor

The need to treat a tooth hidden under a prosthesis and neighboring teeth to which access is blocked. There may be various reasons:

There are situations when removal of a fixed prosthesis is not required. The necessary manipulations to eliminate pain are carried out by drilling a hole in the structure, through which all the required therapeutic manipulations are directly carried out.

After the procedure, the hole is cemented. The service life of the prosthesis is reduced. Removal is carried out only in extreme cases, when there is no other way to reach the affected area and relieve the patient from pain.

Poor crown fixation

Poor fixation or loss of stability of the product most often occurs due to the following reasons:

• making a mistake when installing the base of the prosthesis;
• use of low-quality cementing material;
• destruction of the filling connecting layer.

It is easy to notice such a symptom, because the tooth begins to loosen and cause inconvenience when talking and eating.

Inflammation and gum disease

Periodontal problems arise for various reasons: from the onset of the inflammatory process to injury due to a negligent approach to the manufacture and installation of the product. In such a situation, the prosthesis puts pressure on the gingival margin, rubs, and the inflammatory process gradually begins. The patient needs to dismantle the structure with subsequent treatment of soft tissues damaged due to the pressure of the prosthesis on the gums.

Other reasons

Repeated prosthetics may be necessary if the patient himself desires it for his own reasons (to change the prosthesis to a better, reliable and attractive one), or due to the expiration of the product’s service life. There is a need to replace the structure due to damage and deformation (if the bridge is cracked, repair is not possible in most cases).

Comments

Good afternoon. My metal-ceramic bridge on one tooth became movable. It is possible to remove the bridge without damage in order to reuse it. Thank you.

Svetlana (06/18/2019 at 11:25 am) Reply to comment

Dear Svetlana! As a rule, no, the bridge is completely removed (you need to saw it). In addition, it is fixed on at least 2 supporting teeth, which apparently have become unusable.

Editorial staff of the portal UltraSmile.ru (06/21/2019 at 12:23 pm) Reply to comment

Tell me, how do you remove the crown from the implant?

AlinaR. (06/22/2019 at 17:29) Reply to comment

Dear Alina! There are two extraction methods here, and which one to use will depend on how the crown is attached to the implant. If the fixation was screw (which is more preferable), then the doctor will simply unscrew the screws connecting the crown, implant and abutment. If the fixation was cement, then the specialist will use the cutting method - others are not suitable for implantation.

Editorial staff of the portal UltraSmile.ru (06/25/2019 at 09:19) Reply to comment

Which doctor should I go to to have my crown removed?

Makar (06/30/2019 at 10:02 pm) Reply to comment

Dear Makar! This manipulation should be performed by an orthopedic dentist.

Editorial staff of the portal UltraSmile.ru (07/03/2019 at 09:17) Reply to comment

Is this procedure, removing a crown from a tooth, painful?

Arfa (07/18/2019 at 04:47 pm) Reply to comment

Good afternoon This procedure cannot be called pleasant and comfortable, but it is painless, because... the doctor applies anesthesia. In addition, in most cases, crowns are used to replace already pulpless teeth that do not have a nerve. Pain and discomfort can only occur if inflammation has begun under the crown. Then pain can be felt not only in the tooth itself, but also in the soft tissues surrounding it.

Editorial staff of the portal UltraSmile.ru (07/26/2019 at 09:33) Reply to comment

Will my tooth hurt after the crown is removed?

Vedeneeva Victoria (05.08.2019 at 19:05) Reply to comment

Dear Victoria. A tooth can only hurt if it has developed periodontitis or granuloma. Less often, pain occurs because the crown removal procedure was carried out by a not very professional doctor, who could injure the gums or mucous membranes, or damage the tooth itself.

Editorial staff of the portal UltraSmile.ru (08.08.2019 at 09:25) Reply to comment

Tell me, what if the crowns do not fit tightly to the gums on the back side, where is the palate? is this normal? that is, the tricrowns on the right entered the cast gums; three crowns _and the other three on the back side I feel their edges with my tongue….

san (01/09/2021 at 04:13) Reply to comment

a metal-ceramic bridge costs 10 months on one side it moves away and sways I was at the doctor’s appointment and the answer was swing the entire bridge and come what to do

Natalia (09.12.2021 at 18:51) Reply to comment

Write your comment Cancel reply

Comparison of crown removal methods:

What to do after crown removal?

After removal of structures from teeth, it is recommended to immediately make an appointment with a dentist-therapist and carry out the necessary treatment. Root canal treatment, dental caries, and professional oral hygiene may be necessary. If your teeth are sensitive, they need to be covered with temporary crowns.

In the Aesculapian dental clinics in Krasnodar, experienced dentists perform crown removal in any way; they use modern technology devices - Anthogyr (France), ultrasonic scaler. Moreover, the procedure for removing orthopedic structures is painless for patients, completely safe, and is not accompanied by tissue injury.

Contact any of the Aesculapius clinics in Krasnodar and you will be provided with the necessary dental care. Prices for removal of orthopedic structures in our clinic are listed below.

Stock

-17%

Quadrotti dentures (without palate) 60,000 rub.
50,000 rub.
get -27 %

Teeth in 1 day on Straumann implants using ProArch technology!
300,000 rub. 220,000 rub.
get -9 %

BASAL COMPLEX - Restoration of teeth on 1 jaw in 3 days 330,000 rub.
300,000 rub.
get -13 %

Metal-free dental crown made of zirconium dioxide 40,000 rub.
35,000 rub. get