Simpl Swiss implants are the best solution to dental problems

1354

Modern prosthetic structures are devices that meet all the requirements of orthodontics. They must not only completely replace the functionality of a lost tooth, but also have a high aesthetic standard.

The greatest result that meets these criteria is artificial restoration of organs using implants.

One of the most competitive products is the products of the Simpl Swiss trademark.

A little about the manufacturer

Simpl Swiss implants are a product of Swiss manufacturers, manufactured by the world famous company U-impl, a company with a 30-year history.

Created at the end of 1996, the brand specializes in the development and production of prosthetic dental structures.

In such a short history of its existence, the company managed to become one of the ten largest suppliers of orthodontic products to the markets of many European countries.

Since 2010, Simpl Swiss dental systems have been recognized as one of the most popular models in their niche.

The product line from this manufacturer made it possible to reach a large target audience. Here you can choose both premium systems and choose a completely budget option.

In addition, their main feature is high quality manufacturing, full compliance with all international standards and requirements.

The designs have also been successfully used in Russian dental clinics for a long time.

Rating of Swiss implants Simple Swiss among other systems

Simple Swiss implant systems compete well with analogues from other companies. Patients are often interested in the developments of such popular companies as Osstem and Prodigy. You can understand which is better by comparing the characteristics of implants :

• Osstem. They have been produced since 1992 by a South Korean company, which was the first to enter the world market in its country. They have the following advantages: Company representatives regularly conduct master classes on implantation and announce the recruitment of patients for free implantation of the structure.
• Long service life.
• The outer surface of the system is a combination of a crater and a micro-deepening. This accelerates osseointegration by 20% and allows the structure to be loaded within 6 weeks after surgery.
• The surface of the structure is sandblasted with aluminum oxide.
• There are models with increased stability; they can be implanted into severely weakened jawbone.
• The surface of the structure is rough, which improves and speeds up engraftment.
• Possibility of implantation using one- and two-stage methods.

• Prodigy . Produced by the American company BioHorizons. Their advantages: Made from high-strength titanium alloy.
• They have a rough surface, which is treated with calcium phosphate with quartz particles. This coating is completely biocompatible with jaw tissue.
• The abutment is coated with titanium nitrate, which is practically the same as the color of natural teeth.
• The design has a square thread, which increases the load area, which helps to distribute the weight of the implant evenly. This allows the system to be installed with a small amount of bone structure.
• The implant has a hexagonal connection, which virtually eliminates the risk of losing the artificial root.
• The thread has a beveled wedge type, minimizes the distance from the implant to the abutment, and ensures a strong connection.
• Possibility of installation with instant load.

The Simpl Swiss implant system is competitive and is not inferior to other manufacturers either in quality or in other parameters.

Design features

The company manages to maintain its leading position among the world's best brands thanks to the unique design features of its prostheses:

• The products are made from high-quality medical titanium alloy , which belongs to the class of chemically inactive elements.
  This is a big plus, since it allows several times to minimize the risks of developing inflammatory processes in internal tissues and individual intolerance to the material;
• the screw part of the structure is a conical hexagon, characterized by a unique processing principle, thanks to which the rod is quite easily and at the same time reliably implanted into the hard bone tissue of the jaw.
  A durable metal frame is able to withstand a high level of mechanical pressure force and allows you to fully perform the chewing function;
• special grooves - located along the apical zone. During the implantation process, they are filled with fragments of the natural bone structure, thereby enhancing the strength of the primary attachment;
• neck of the product - the presence of microthreads in this part of the device made it possible to maximally preserve the volume of bone fragments in the area of ​​the soft mucous membrane surrounding the membrane, by minimizing the pressure force in this part.
  This makes it possible to maintain high aesthetic values ​​of the gums and upper segment of bone tissue;
• unique connection “implant - abutment” - eliminates the appearance of cracks, microchips, prevents the penetration of food debris and pathogenic bacteria that provoke inflammation;
• conical shape of the model’s body – makes it possible to use it when bone tissue is too soft, while achieving high levels of primary stability;
• edge ledge in the platform area - guarantees the tightest possible fit.

Individual approach to replacing lost teeth using Noris implants, review of catalog models.

Read here the pros and cons of Alpha Dent implants.

At this address https://www.vash-dentist.ru/implantatsiya/proizvoditeli/unikalnost-koreyskih-anyridge.html you will find reviews about Anyridge implants.

Simpl Swiss is a worthy implantation system for the following reasons:

Advantages

Before taking their place on the Russian dental market, implants from Switzerland were tested in Russia.

The test was successful, revealing the following advantages of Simpl Swiss:

• increased osseointegration - thanks to a unique coating that provides a porous surface relief.
  The coating is carried out using a patented technology, during which the product is subjected to sandblasting and acid etching. As a result, microparticles of bone fragments enter the pores, which ultimately increases the rate of fusion of the rod and the quality of its engraftment with the hard tissue of the jaw.
• biocompatibility – the composition of the material used in the manufacturing process fully corresponds to its declared characteristics, which is confirmed by international certificates of belonging to class 5 ELI;
• wide possibilities in terms of aesthetics - the implant is equipped with a flexible connecting profile, and the surface part of the system has a light golden tint, which improves the external perception of the model.
  The product range includes versions adapted for the production of zirconium devices for individual orders. This is especially true for frontal prosthetics;
• Convenient and safe packaging - each element is packed in a separate container. It is opened immediately before installation, in the personal presence of the patient. Each product unit is assigned a serial number, which is recorded in the treatment card;
• lifetime service life – subject to correct implantation and proper use;

The design is designed in such a way that it allows for both two-stage implantation (after artificial augmentation of bone fragments) and on a one-stage basis , which significantly reduces the osseointegration period.

At the same time, the high quality of engraftment of the device is completely preserved.

How does turnkey installation work?

1. Initial consultation with a dentist . The doctor assesses the condition of the oral cavity using x-rays of the jawbone and sanitation. Additionally, the patient must undergo a blood test to identify possible contraindications.
2. Preparatory stage . If necessary, dental treatment, gum restoration, and treatment of concomitant diseases are carried out.
3. Direct implantation . The operation to install one implant takes no more than an hour. First, the patient is given anesthesia, after its effect begins, the gum is cut from above, and a bed for the artificial root is prepared in the bone. After installation, the implant is covered with a gum former or plug to create a smooth mucosal surface. The engraftment process lasts 2-6 months. When installing a one-piece structure, no incision is made in the gum - the implant is simply screwed into the bone structure, avoiding severe tissue damage.
4. Installation of the prosthesis . At first, temporary prostheses are installed, and then permanent ones.

In some cases, additional procedures may be performed. For example, those who have insufficient bone volume undergo bone augmentation.

The whole process lasts at least 2-4 months; in severe clinical situations, when treatment or bone augmentation is required, this can take up to 1.5 years. These terms are relevant for classical methods of implanting titanium roots. With express implantation, everything takes about a week.

Kinds

The range of implants is based on three main types:

• Inter – suitable for both standard two-stage implantation procedures, when bone tissue grafting is required, and for one-stage implantation. The main advantage is the versatility of the design and its wide range of applications.
• Maxi – is used primarily for replacing chewing teeth against the background of severe fragmented atrophy of the mandibular bone tissue. The advantage is increased strength of the product and enhanced fastening of the model;
• Mono Mini – the scope is somewhat limited. The system is adapted only for a one-step procedure. An undeniable advantage is the possibility of its implantation in the presence of limited bone spatial mass.

Check out the rating of the best dental implants and their manufacturers.

This material is dedicated to Biotech implants.

Here https://www.vash-dentist.ru/implantatsiya/proizvoditeli/semados-obzor-produktsii.html reviews about Semados implants are offered.

Implants are not the only product produced

In addition to implants, U-impl produces the following products for prosthetics:

1. Gum formers are used to give the desired relief to the gums after installation of an artificial root.
2. Shaping rings, also used for gum shaping.
3. Transfers, installation keys, implant and abutment analogues, which are used to create a plaster model of a number of teeth.
4. Inter abutments for cemented prostheses.
5. Screw-retained abutments used for removable and conditionally removable dentures when more than two teeth are missing.
6. Screws for attaching the abutment to the implant.
7. Implantation kits, including surgical and orthopedic instruments needed to implant an artificial root.
8. Drills for choosing the direction of implant installation.
9. Mills for forming a bone bed.
10. Cement for fixing crowns.

Contraindications

Implantation is partially or completely prohibited in the following clinical situations, which can be classified as direct and relative contraindications.

The main ones include:

• diabetes mellitus at any stage of its course;
• malignant neoplasms;
• a course of chemotherapy treatment, which results in low immune status. For this reason, the design may not take root;
• AIDS and HIV infections;
• active form of tuberculosis;
• nervous and mental disorders;
• heart failure;
• insufficient blood clotting - in this case we are talking about both hereditary and acquired diseases;
• chewing hypertonicity;
• metabolic dysfunction, which negatively affects wound healing processes and inhibits the engraftment of the product;
• bite defects and a small volume of soft mucous tissue in the area of ​​prosthetics;
• individual intolerance to drugs administered for pain relief.

Relative contraindications, most of which can be eliminated, include:

• poor hygienic condition of the oral cavity;
• weak body defenses against the background of concomitant diagnoses;
• gum pathologies and dental diseases, such as periodontal disease;
• deviations that are difficult to control - bad habits, bruxism.

In other situations not related to the factors listed above, there are no restrictions on the installation of implants.

When to place implants and restrictions on installation

Implantation is the only method of tooth restoration that is not limited in terms of the absence of elements of the jaw row.

Titanium roots are indicated for installation when :

• it is necessary to restore one, several or all teeth;
• the outermost teeth in the row are missing;
• if you are allergic to the materials from which prostheses are made;
• it is impossible to install removable dentures.

Implantation has its contraindications. Some of them are temporary, that is, after the problem is eliminated, the operation can be performed.

Time restrictions include:

• decreased immunity;
• exacerbation of viral and other diseases;
• periodontal and dental diseases;
• presence of compensated diabetes mellitus;
• insufficient oral hygiene.

Absolute contraindications to implantation of dental structures:

• unstable (uncompensated) diabetes mellitus;
• diseases that negatively affect the functioning of the immune defense - AIDS, HIV, tuberculosis;
• malignant tumors;
• inability to use anesthesia;
• serious pathologies that cause deterioration in blood clotting;
• hypertonicity of the jaw muscles.

• Complete restoration of the dentition in just 4 days!

  
  more details

  Roott Pterygoid Implants Sinus lift is no longer needed!

  more details

  Once and for life! Express implantation in 4 days with a permanent ReSmile prosthesis

  more details

  All-on-4, All-on-6, ReSmile, Zygomatic implantation We use all modern methods of dentition restoration

  more details

Warranty and service life

Famous manufacturers, which include U-impl, guarantee a lifetime of use of their products. If we consider the term in a specific digital context, this is a guarantee of use for 70 years.

However, in practice this does not always happen. Much depends on the practical experience of the surgeon. Only within the framework of the strictest implementation of all manipulations established by the protocol, the procedure will be carried out absolutely correctly.

The patient’s attitude towards it also plays an important role in how long the implant will last. Correct behavior during the rehabilitation period , compliance with all medical recommendations, as well as proper care of the structure and oral cavity in everyday life are the key to ensuring that the prosthesis will be used for a long time.

As for the dentist himself, he gives a two-year guarantee. It should not be confused with the service life of the implant - here we are talking about a guarantee for the work performed.

Features of Swiss implants

Thanks to innovative technologies, Simpl Swiss dental structures are used for single-stage, two-stage implantation, also in complex cases with minimally preserved bone tissue.

The uniqueness of manufacturing dental implant structures:

• Grade 5 titanium is used in the production of the Swiss implant. This minimizes the likelihood of tissue inflammation.
• The golden color of the abutment conveys all the aesthetics and beauty of the new tooth.
• The thread of the implantation rod creates reliable fixation in the tissue, while the load is evenly distributed.
• The rough surface of the product improves implantation into the bone tissue. And micromechanical adhesion ensures the establishment of a titanium root with the exception of mobility.
• The hexagon inside the implant provides stability for connection to the abutment without micro-cracks. Thereby increasing the service life and eliminating future inflammatory processes.

Important! The conical shape of the dental system is reliably embedded in the bone tissue, eliminating displacement.

Price

It is extremely difficult to unambiguously determine the cost of this type of prosthetics. It depends on the clinical picture - the tooth may have already been removed at the time of implantation, or it may simply hurt, or, for example, decay. The price, accordingly, will be different.

In addition, how much the service will cost depends on the status of the clinic, region of residence, the cost of preliminary manipulations and the cost of anesthesia.

If we consider the situation in the average price aspect, then the cost of one unit will vary within 40,000 rubles.

It is worth noting that the manufacturer, having a wide product line, still focuses on patients with an average income level.

The video provides additional information on the topic of the article.

Reviews

Artificial restoration of organs using implants is the most popular way to restore teeth to their former attractiveness and functionality.

However, before deciding to install them, you should objectively assess the situation for possible contraindications, as well as the feasibility of their implantation. The doctor should always have the primary say in this matter.

If you are interested in the products discussed in the article, you can leave your comment in the appropriate section.

If you find an error, please select a piece of text and press Ctrl+Enter.

Tags implants manufacturer

Did you like the article? stay tuned

Previous article

How to recognize and how to treat exostosis after tooth extraction

Next article

DIO dental implants - the highest quality from a South Korean company

Special offers for turnkey implantation