Adin implants: an inexpensive system with wide capabilities

Private dentistry offers clients a wide range of services for the diagnosis and treatment of oral diseases. In addition to standard options, we offer to install implants from Adin Dental Rus, a well-known Israeli manufacturer, which are in great demand all over the world.

The clinic has the most modern equipment, which is purchased from the world's leading manufacturers, and also offers clients comfortable conditions for waiting and performing various procedures. There is free Wi-Fi throughout the dental center, and you can also sit in a cozy waiting room with a cup of tea or coffee. Our clinic is located next to the Kyiv metro station in the very center of Moscow, so getting to it is not difficult. There is convenient parking for clients nearby.

Experienced doctors, who have been working as a close-knit team for many years, understand each other perfectly and solve complex issues together. Every day, four specialists work in one shift: a pediatric orthodontist, a surgeon, a therapist and an orthopedist. Here you can get the Israeli Adin implant and not worry about the risks: employees take the material out of sealed packages right in front of the patient.

Despite the fact that the clinic offers business class services, prices remain affordable and profitable for most clients.

Indications

Installation of Adin implants is indicated if a person has:

• Complete or partial edentia of both jaws (absence of teeth).
• The absence of one or more frontal teeth.
• End defect (absence of chewing teeth on both jaws).
• Bone deficiency, narrow alveolar ridge (usually a congenital defect).
• Pathological mobility of teeth due to insufficient hygiene, malocclusion.
• Increased tooth wear due to bruxism and pathological occlusion.
• Trauma to teeth with damage to the root and soft tissues.

In what clinical cases can the Adin system be used?

Implants from an Israeli manufacturer are used both in the absence of one tooth, in the loss of several teeth, and in cases of complete edentia. They can be loaded with single crowns, bridges, and complete dentures that restore the entire dentition (12-14 units).

The company has also developed implants with a special design. This is the narrowest TOUAREG™ UNP implant - with a diameter of only 2.75 mm - and the TOUAREG One™ implant for single-stage implantation, i.e. You can fix the prosthesis on it immediately after installation. They are designed for use in areas with little bone volume and for the restoration of maxillary lateral teeth and mandibular incisors.

Contraindications to implantation

• Diseases of the cardiovascular and nervous systems.
• Incoagulability of blood.
• Diabetes.
• Malignant neoplasms.
• Drinking alcohol, smoking.
• Carious lesions of teeth.
• Weakened immunity.
• Chemo- and radiation therapy.
• Osteoporosis.

Temporary restrictions on implantation of Adin constructs are pregnancy, breastfeeding, viral diseases and infectious inflammation, and periods of exacerbation of chronic pathologies.

Would you like us to call you back?

Warranty for Israeli implants and service life

The warranty period provided by manufacturers for dental structures can reach 20 years. This means that the functionality of the implant will be maintained for the specified period.

In addition, if the system is delivered defective or breaks down, the manufacturer undertakes to replace it free of charge.

You should not generalize the warranty obligations of the dentistry where the structure was fixed and the warranty received from the manufacturer. The medical institution does not take responsibility for technical failures; only the manipulations performed by the doctor are covered by the guarantee. If the structure is rejected due to non-compliance with the installation technique, the patient must be reimbursed for all expenses. As a rule, the obligations of a medical institution are reflected in the contract for the provision of services.

What are Adin implants

The Adin company launched its production in 1972 in Israel. The company's first clients at that time were the USA and the Middle East. The company got involved directly with implants about 30 years ago, and now Adin products can be found in service with almost every implantologist.

The company strives to create high-quality dental products and improve implant installation technologies that can significantly speed up the tissue healing process.

Adin provides doctors not only with high-quality instruments, but also with knowledge in the field of modern implantology. The company's research staff regularly organizes conferences, webinars and advanced training courses.

Advantages of Israeli dental implants

• A varied selection of dental systems and superstructures from popular manufacturers Alpha Bio, CORTEX, MIS, Adin;
• Survival rates approach 98%;
• In Israeli research centers, new products are constantly produced and the characteristics of already manufactured models are improved;
• Manufacturers from this country offer dental implants that can eliminate defects even in the most difficult cases:
• There are endosteal structures that are fixed into the bone, and subperiosteal structures, which are installed in the area between the periosteum and the jaw bone.

What is special about Adin implants?

Thanks to a carefully developed implant system, these structures can be implanted into atrophied tissue with a small bone volume.

Advantages of Adin implants:

• The products have quality marks and certificates that meet all international standards for implant products.
• Implants are made from the highest quality material, which minimizes the risk of rejection.
• OsseoFix coating ensures high rates of engraftment and a complete absence of allergic reactions.
• Thanks to the improved shape and thread, the implant is firmly fixed in the bone tissue.
• Due to the absence of an acidic composition on the threads, the design retains its original shape and structure for a long time.

Adin product varieties:

• Arrow one-Piece: one-piece support structures for crowns.
• Touareg: installed when there is a small amount of bone for implantation in one or two stages.
• Touareg-X: the shape of the implant promotes good adhesion of the mucous membrane to the top of the structure.
• Touareg-S: used for minimally invasive surgeries after preliminary sinus lift.
• Mini Oskar: relevant in orthodontic and orthopedic treatment.
• Swell: ensure uniform distribution of the load on the teeth in case of jaw anomalies.

The manufacturer guarantees the service life of implants from 5-10 years. With systematic oral care, structures can last more than 15 years.

Advantages and disadvantages of Adin implants

• Wide range of models
• Quite high quality of implants and components
• Possibility to carry out classical and one-stage implantation, as well as implement an immediate loading protocol
• High survival rate
• Low cost

• Lack of minimum implant sizes (the shortest models are 8 millimeters)
• When carrying out complex aesthetic restorations, Adin implants are inferior to top brands
• These implants are not among the top most popular systems, so they are not offered in all clinics

Manufacturers of Israeli dental implants

There are several known manufacturers of Israeli implants. At the same time, the cost of their fixation can reach 35 thousand rubles together with the installation of a metal-ceramic prosthesis.

Currently, products from the following manufacturers are in demand: Alpha Bio, ABDental Devices, Mis, Ards, Iterum and Adin.

In the manufacturer's catalogs you can also find bone tissue substitutes, orthopedic and surgical instruments and superstructures.

Connection types

Attention! One of the main parts of each implant is the connection of the artificial root to the abutment. The variations of this connection often determine the choice of one or another implantation system.

The manufacturer Adin takes this point into account, therefore, in the range of models produced, the range of connection types is very wide, allowing you to choose the best option. The most famous is the hexagon - a connection considered a classic and reliable option. Among the manufactured implants there is a whole line of models with a conical connection. This fixation is of very high quality and ensures maximum immobility of the structure from the very first stage.

Regardless of what type of implants the attending physician selects, the patient can be sure that implantation with products from Israel will be successful, and the prostheses themselves will last for the maximum possible period.

Structural installation options

After a complete diagnostic examination and examination of X-ray images, the specialist offers the patient a specific model of implant and the optimal method for its installation. The company's assortment includes models designed for both delayed (two-stage technique) and immediate loading - single-stage and one-stage implantation.

• classical two-stage technology - first the implant and the plug are fixed, after a while the latter is replaced with an abutment. After 4-5 months, after complete engraftment of the titanium rod, the gum former or the crown is fixed,

  
  The gum former needs to be worn for about a week.

• one-stage technique with immediate loading - an artificial root is implanted, onto which a fully functional single prosthesis is fixed on the same day or within a week,
• one-stage implantation - immediately after tooth extraction, a titanium rod is implanted into its socket, while the crown can be fixed immediately or after the implant has completely healed. The technique has quite a few contraindications and is used in cases where the patient has the opportunity to undergo full diagnostics and preparation before removing a tooth.

“Last year I was in a car accident, after which one tooth was badly damaged. After a full examination, the doctor suggested installing an Adin implant and a metal-ceramic crown on it. He said that in my case the bone condition is normal, there are no health problems, so there is no need to overpay for an expensive brand. Moreover, I trust Israeli quality. Of course, I had to go through training, get everything tested, and heal a couple of holes in my back teeth. But now I’m smiling with all 32 teeth again! By the way, the operation went quite quickly and there were no problems after it either. I was just afraid in vain, I thought it would hurt...”

AllaFL., 42 years old, from correspondence on the forum www.32top.ru

The operation is performed under local anesthesia, but sedation or general anesthesia can also be used at the patient's request. The specialist makes a small incision in the gum, forms a bed of the required diameter in the bone tissue, where the implant is then placed. After this, the mucosa is tightly sutured, and the patient is offered detailed recommendations and instructions during rehabilitation. In other cases, the implant is literally screwed into the bone, thereby creating a compression effect, that is, compacting hard tissue around itself and improving primary stability.

The photo shows the installation of the implant

Prices for Israeli implants at the Elident clinic

It was previously noted that the cost of Israeli implants is considered a key advantage, indicating in favor of choosing these systems. In this case, the determining factors include: the rating of the manufacturer, the pricing strategy of dentistry and the characteristics of the manufactured model.

Reviews of Israeli dental implants

Most often, there are positive reviews about Israeli implants. In particular, leading dental experts prefer the Alpha Bio implantation system. Patients are inclined to a similar opinion, arguing that these are fairly inexpensive designs that have a long service life.

The MIS system is recognized as less popular among patients and specialists. However, the above systems are identical in quality.

Dental implants ARDS and ADIN deserve much less reviews. Despite the good rates of osseointegration and the minimal likelihood of rejection, according to leading dentists, they lack some “zest” to be included in the list of “best” budget systems from Israel.

There are practically no reviews about Iterum products, which is due to the relatively small age of the company.

In general, if we analyze the reviews of all the implantation systems presented in the article, we can conclude that negative impressions are mainly caused by the doctor’s insufficient qualifications.

Elident Dentistry employs implantologists of the highest category who are capable of high-quality installation of budget Israeli systems, which are somewhat inferior in quality and aesthetic characteristics to their elite counterparts.

Article expert (author):

Israeli or Swiss implant: which one to prefer?

Many patients, having carefully studied the types of Israeli implants on the Internet, still continue to ask the question: “Which manufacturer of implantation systems is better to give preference?”

Undoubtedly, the Swiss models Straumann and Nobel are superior to their analogues presented by Israeli manufacturers in all major indicators. However, the period of operation of dental systems from Israel is often identical to designs from elite manufacturers. But, most often, premium systems are provided with a lifetime warranty.

If we talk about the variety of models produced, this is not a key advantage of Israeli products, since not all are suitable for certain clinical situations.

A similar story arises when you have to choose between German and Israeli implant manufacturers. Dental structures are of quite decent quality, however, there are difficult situations when premium products demonstrate more advanced aesthetic indicators.

That is, the priority characteristics that indicate in favor of choosing Israeli dental implants remain prices and sufficient reliability.

Indications and restrictions for installation

Attention! The main indication for the use of Adin implants is the replacement of teeth lost for any reason. Using this system, you can restore both single lost teeth and cope with the problem of a complete lack of dentition.

Products from this manufacturer are suitable for use both in standard clinical cases and in complicated diagnoses. Adin implants can be installed even in cases of thinned bone tissue or to restore front teeth.

Pregnancy is not the best time for implantation, because... the female body is exhausted and very sensitive at such a moment. In addition, the use of anesthesia is not advisable during pregnancy.

As with any dental system, there are restrictions on use for Adin brand products. The main contraindications include:

• cardiovascular diseases;
• respiratory diseases;
• pathologies and features of the lymphatic system;
• taking anticonvulsants;
• oncological diseases;
• general diseases that are in the acute stage;
• endocrine diseases and bone metabolism disorders.

A relative contraindication is pregnancy. During this period, the installation of implants is not advisable, but is possible in case of emergency.

Peculiarities

The popularity of Adin implants is explained by their features, both design and innovative.

Read about the features of the basal dental implantation method in the next review.

In this article we have collected photos of how dental prosthetics are performed in the absence of teeth.

At the link https://www.vash-dentist.ru/implantatsiya/proizvoditeli/zubnyie-mis-podrobnyiy-obzor.html you will find recommendations on which models of MIS implants should be purchased in each specific case.

Technologies used

The company is constantly developing developments in the field of dental implantology and osseointegration.

To improve the quality and performance of implants, the latest technologies are used in production, the use of which became possible thanks to the participation of professional biologists, dental surgeons, and practicing implantologists.

Products for dental implantation have passed the appropriate tests and have all the necessary world-class quality certificates, including FDA and CE, as well as ISO 9001:2000 and ISO 13485:2003.

In addition, all manufactured implants and components undergo mandatory testing in our own laboratory and in the Israeli Department of Health .

Types of connections

The type or type of connection to the abutment is one of the most important characteristics of the implant. It is he who sometimes plays a key role in choosing a particular system.

Even at the development stage, the company’s researchers took this into account, so Adin implants, depending on the model, can have different types of connections:

• First of all, this is a classic hex connection .
• In addition, the company has also released a line of implants with a conical connection , which ensures the highest quality fixation of the rod and the absence of micro-loosening of the structure even at the initial stages.

Surface

One of the most important roles in the osseointegration of implants is played by the quality of their surface, in particular its cleanliness and the absence of any impurities.

Based on our own and partner research in the field of osseointegration, the PTS method, which means pure titanium surface, was developed and patented. The surface obtained with its help is called OsseoFix™.

The OsseoFix™ technique allows you to simultaneously achieve two goals:

• The first is to obtain a rough metal surface , which promotes better engraftment.
• And the second is to achieve maximum cleanliness of this surface . It does not use classic acid pickling, which can lead to the formation of foreign particles.

Additionally, the surface is enriched with oxygen and calcium phosphate, which further improves survival rate.

On the surface of the implant, thanks to the resorbable biocompatible material, a TiO2 film is formed, which is free of charge and completely textured .

For which implantation options can they be used?

Adin implants have a fairly wide variety of types, so they can be used for a wide variety of implantation options.

• Classic two-stage .
  In this case, the last stage - installation of an artificial crown - is significantly delayed in time from the installation of the titanium rod so that it has time to undergo primary osseointegration. To carry out such operations, all Touareg and Swell lines are used.
• One-step .
  In this case, the implant is placed immediately after tooth extraction. This allows you to minimize the trauma of the operation and speed up the process of fusion of the installed rod with the jaw bone. The Touareg S and X ranges are used here, as well as the One.
• Express method. In this case, the final restoration of teeth is carried out in an extremely short time.
  The load that the rods installed in the bone almost immediately receive helps not only to speed up the process of their engraftment, but also allows the patient to quickly get rid of the aesthetic problem.

  A separate line of implants, One, was specially developed for this technique.

How the process of installing Adin implants takes place, watch the video:

Which implants are better: Korean or Israeli?

The cost of these and Israeli dental implants is almost at the same level. The only difference is that Israel has been on the implantology market for over 40 years, and Korea for no more than 28 years.

It should be noted that in the development of such Israeli systems as Alpha Bio, Noris Medical and AB Dental, materials of unsurpassed quality are used, innovative technological solutions and modern implantation techniques are used. At the same time, a distinctive feature of the products of the above brands is the variety of models presented.

Also, to answer the question: “Israeli or Korean implants - which is better?”, special attention should be paid to the period of their operation. For dental systems from Israel, it reaches several decades; for analogues from Korea, the period of use of implants is significantly reduced.

An undoubted advantage is also the focus on our own technological solutions - unique techniques for drilling the base, surfaces with an improved structure for effective and prompt engraftment.

Another important advantage of Israeli implantation systems is the improved thread shape, which guarantees reliable initial stabilization and the ability to quickly fix a temporary prosthetic device.

About the manufacturer

The manufacturing company has been known since 1972. The founding city was Nazareth. The company began its development with the production of various dental products, quickly increasing its turnover. The small company has now grown into a large corporation.

Materials used

Adin implants are based on a metal support made of high-strength titanium, widely used in the medical field. Titanium products are characterized by the highest quality, reliability and excellent biocompatibility. The survival of titanium implants into bone tissue occurs within several months.

Adyn dental implants are easy to use. The main advantage of these implants is their reliability and excellent survival rate.

Design features

The range of products is quite wide, and each model has its own special characteristics aimed at solving certain problems. Adin implants differ not only in their shape, but also in the method of connection, as well as the type and size of the thread. The diameter of the platform and the height of the implant vary depending on the required characteristics. Adin brand products are distinguished by the use of innovative technological developments.

Technologies used

Important! Adin Corporation is continuously improving its implantation technologies. Permanent employees include dental implantologists and surgeons, as well as specialists in the field of biological sciences.

The company's activities are certified internationally, regularly passing all relevant commissions and inspections. The production of implants has the appropriate CE and FDA certificates. The company's management level is confirmed by ISO 9001:2000 and ISO 13485:2003. The manufacturer has its own laboratory where manufactured products are tested before sale. The Israeli Department of Health also monitors the quality of Adin implants.

Reviews

Well-known Israeli products appeared in our country relatively recently, but have already gained the trust of both implantologists and patients.

You can discuss the advantages and share your impressions about Adin Dental Implant Systems products by leaving a comment below.

If you find an error, please select a piece of text and press Ctrl+Enter.

Tags Adin implants implantation prosthetics

Did you like the article? stay tuned

Previous article

Protefix cream: in what cases is it effective to use?

Next article

What kind of toothpaste should be used for periodontal disease?